User Manual 

Please read the instruction manual carefully and follow the instructions in the operation manual. This manual is intended to guide you to use the product correctly.

Watch Video Guide

Operation Instruction

 1. Before using the air compressor, ensure that the vehicle is safely parked away from any danger.

2. Connect the air hose by screwing it on clockwise. Ensure that the air nozzle is tight to prevent air leakage. Connect the appropriate attachment for the device you want to inflate. Secure the attachment in place by closing the lever.

3. To turn on the AutoPump, press and hold the “on” button.

4. To change the mode to; car, motorcycle, cycle or ball. Press the circle arrow icon 🔄

5. To change the unit of measurement to Psi, Bar, Kpa, or Kg/cm². Press and hold the circle arrow icon 🔄

6. To set the desired pressure, press "+" or “-” until you have reached the correct pressure.

7. Connect the hose to the device you wish to inflate and lock the valve down.

8. Press the power button once and the product will automatically start to inflate. The product will automatically stop inflating when it reaches the preset pressure value.

9. To turn off the device, press and hold the “on” button.

10. During the use of the product, when the battery icon is blinking, the product is low in power and needs to be charged. Use the charger provided with the product until the blinking stops.

11. Charge the battery once a month when not in use to maintain good battery health.

Precautions

1. Please charge the device prior to use. If the battery is low you can use the DC 12V power supply to continue using.

2. When the product is connected to an external power supply, use only the 12V DC power supply if provided and the power supply must be bigger than 60W. Do not use any other power supply or you may damage the product.

3. During continuous use the product may become hot. If this happens, turn the product off and let it cool down.

4. Do not leave the device unattended when in use.

5. Do not allow children to use the product.

6. When using the air compressor, remember to keep away from the humid environment and wet environment to prevent water from entering the product. This can cause damage to the product.

7. Do not expose this product to extreme conditions such as high temperature, low temperature, extreme poor weather etc.

8. Do not discard the product, recycle in accordance with your local laws.

Warning Prompt

1. Check the tyre pressure before starting your car and replenish the pressure if needed.

2. When using the air compressor on the roadside, park the vehicle to a safe position.

3. When the vehicle is parked on the side of the road, do a good job of warning your surroundings.

4. Charge the product in time after use, and charge it once a month when it is not used.

Main Problems & Solutions

1. The pressure of your device cannot be higher than the pressure set on your air compressor for it to work properly. Solution: You may need to deflate your device in order to inflate it to the desired pressure.

2. The power supply of the product is unstable and becomes disconnected at any time. Solution: Check whether the plug of the air compressor cigarette lighter is in good contact with the socket of the car cigarette lighter. If it is not, remove any dust, dirt or impurities in the socket of the cigarette lighter. The metal sheet on both sides of the plug of the air pump should be gently pried open to the outside, so that it can contact with the socket more well.

3. The product gets too hot. Solution: Such small device with high output can generate heat when in continuous use. Turn off the device and leave cooling for 10-15 minutes.

5. The Digital air compressor stops working immediately after the tyre is connected, and the value displayed on the dial is very high. Solution: Ensure your device is not over inflated. Deflate device and recheck the pressure.

6. Air pressure is not accurate. Solution; When the air pump leaves the factory, the product is calibrated and adjusted to the standard air pressure, the tolerance is very small. When the pressure value has a certain gap with your other test props, the actual tolerance value is very small and does not affect the driving of the car. The test pressure of both props will have a certain tolerance with the standard pressure, and the tolerance is not more than 0.2bar, it will not affect the normal use. 1 bar = 14.5 psi= 101 Kpa

7. For any other problem please contact our after sales support: support@getautopump.com